MidNite Solar MNPV6-250 Disco Combiner Box
Midnite Solar, Combiner box with disconnect handle & 3 breaker busbar, Add 300VDC or 120/240VAC DIN mount breakers, MNPV6-250 DISCO
The MNPV6-250 DISCO is a three-string PV combiner box for use with charge controllers that run at 200 and 250 VDC. Three 300 Volt DC rated breakers can be mounted in the combiner. The front lockable handle on the combiner physically attaches and disconnects all three breakers at the same time. It has an insulating dead front and a gray aluminum NEMA type 3R rainproof enclosure.
Breakers are not included with the combiner. The MNEPV15-300 breakers, rated at 15 amps and 300 volts DC, are usually used with this combiner.
- UL/CSA listed for North America
- NEMA-3R rated, all-aluminum powder coated housing that won't rust
- During installation, the cover can be flipped up and left exposed.
- PV Negative bus bar with 14 useable openings
- Ground bus bar with 14 available openings on the chassis
- Standard din rail to mount up to three 300V breakers
- 168 Amp tin-plated copper bus bar to combine breaker outputs
- For protection, the dead front cover snaps into place after the wiring is finished.
- Knockouts for PV in and PV out on bottom and sides
- Warranty period: 5 years