Unirac 004700M 7" Mill Standoff

UniRac, Standoff, 2 Piece Aluminum Flat-top, 7", Mill Finish, without Lag Bolts, Qty. 1, 004700M

When flashed installations are needed, such as on tile roofs, use standoffs. Two-piece aluminum standoffs allow for precise flashing positioning over a protected base before the standoff is mounted. There are four common heights for standoffs: 3, 4, 6, and 7 inches. There are appropriate flashings open.

SunFrame, SolarMount regular, or SolarMount HD rails are all compatible. 2 lag screws are used to secure the lag screws to the rafter. With standoff hardware, secure L-foot or installer-supplied strut directly to the standoff. Installing over a tile roof is particularly useful since the flashing can be precisely fitted over the protected base before the shaft is installed.

Features

• Highlights - Aluminum with a clear anodized finish. One per L-foot should be used. Aluminum extrusion in two parts. Three standard heights are available: 3, 4, 6, and 7 inches. 3/8" is included "Two 5/16" lag bolts and a 3/4" serrated flange bolt with EPDM washer for connecting the L-foot. 1-5/8" outside diameter of the shaft ".