ProSolar C275IMC-1-G Clear Mid Clamp, 49.9-50.4mm

ProSolar, Mid Clamp, 2.75" (49.9mm to 50.4mm), Includes (1) Channel Nut with grounding buss bar, lock washer and hardware, Clear, Qty. 1, C275IMC-1-G

The clamping system uses end and mid clamps to connect the module frame to the RoofTrac® support rail. This fully integrated clamping system changes the structural properties of the aluminum channel, making it significantly stronger. Solar modules can be mounted on the roof with a lower profile, allowing for a more aesthetically pleasing installation.

Module clamps are designed, extruded, and engineered with each module frame in mind. By applying inward tension to the module frame, their ingenious clamping mechanism secures the laminate in the frame. The mid clamps are held in place by channel nuts with a grounding bus bar, and the green lock washer indicates that the electrical link is right.

Mid Clamp Height: 49.9-50.4 mm

You should double-check that the thickness of the module matches the clamp dimension. At any time, producers have the right to adjust measurements.

Ordering Mid Clamps: Multiply the figure by two for each row that is one less than the number of modules in the row. A row of four modules, for example, necessitates six mid-clamps: (4 - 1) x 2 = 6.